Steel column in the press will need to use anti-rust care

Steel column in the press will need to use anti-rust care, so as not to rust angle punch. Human hand sweat, sweat and salt, it is easy to rust the metal products. Even with a chrome-plated cylindrical gauge, anti-rust strong, still can not be ignored rust. 4, to promote the inverted Cylindrical gusset collection, high heels, best head, punch upright Place a very important bottom of the cylinder gauge to prevent dust and abrasion or damage, so the fuzzy upside down and safer. But the case of lie, in addition to a space other than the cylindrical gauge trade also broke out, collision, scratch scratch accident.

In order to prevent damage to the cylinder gauge or roller CNC machine, the best way is to use stored buffering or wood protection measures. Punch special circumstances, you can use the features, but if there is no wooden box, punch recommended on the mat or wood floor area, punch and then use the bubble bag or buffer coating will be relatively peaceful. Note: Pneumatic consumption per minute atmosphere (1) refers to the air consumption of the clutch intermittent operation. (2) In order to ensure the safety of punching and punching, the punch press is equipped with pressure relay drill machine buy online. When the pressure is lower than 0.4, the punch can not start.

Leave a Reply

Name (required)


Mail (required)


Website